HONGYANG GROUP Honduras Technical Center

Fax: +86 (577)88097280

HONGYANG Group logo

HONGYANG GROUP Honduras Technical Center , Discuss Technical Problem , Suply After Service Online of Fuel Dispenser, Please Regist Firstly




FlowMeter Type: Optional

Accuracy : ±0.2%

Pressure Loss (kg/cm): Under 0.25

Motor Voltage(V): 110V/220V/380V,50Hz/60Hz

Capacity(hp): 1HP(0.75kw)

Input Voltage: 110V/220V/380V,50Hz/60Hz

Nozzle : Auto Shut-off Nozzle

Environmental Condition : -40~~+55degree

Control Type : Solenold Vale Control Type

Preset Function :Provided(Small LCDIndicator)

Display(Counter) :Type LCD and Bright Backlight

Digit of Volume : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price : 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Optional Display Type: LCD and Bright Backlight

Digit of Volume :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount: 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price: 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range: 0~~99,999,999,99



Weight :215kg

Dimension(L×W×H): 1100*525*2170(mm)

Dimension(L×W×H)Of Qty of Container: 40ft: 44 20ft: 22

products links


technical archives

    erance not exceed ±0.3%,re fuel dispenser peated measuring no more than 0.15% as fuel dispenser is operated within the flow range between maximum flow-rate (Qmax) and minimum flow-rate (Qmin). Flux scope is also called measurable range --- between minimum measured value and maximum flow-rate within basic tolerance. The ratio of maximum flow rate to fuel dispenser minimum flow rate is called measurable ratio. In model testing the value is 10 to 1. Accuracy testing is conducted at six flow points within the measurable range so as to get their tolerances. This relation between tolerance and flux is called the tolerance nature of flow meter. The less flow tolerance the better. Measurable range ratio is 10 to 1 as fuel dispenser being left factory, testing three flux points, that is, Qmax, 0.4 Qmax, 0.1 Qmax . However, the ratio in operation place is 5 to 1, only testing two flow points -- Qmax , 0.2 Qmax . Minimum measured volume testing Testing purpose is to assess indicative tolerance when refueling by minimum measured value. Relevant regulations stipulate that the minimum flow rate don’t surplus 5L as for a fuel dispenser with maximum flow rate no more than 60L. Its maximum tolerance in terms of minimum measured value don’t exceed ±0.5%, measurable repeatability no more than ±0.25%. Flow stoppage t fuel dispenser esting The testing is conducted in order to define the possible tolerance range that generated in refueling progress in which hydraulic flow stop suddenly due to some accidents like power cut. Vapor separator performance testing It is conducted to value the capacity of vapor separator how much vapor would be divided from oil. Vapor separator’s function is to ensure that media passing over flow meter should be in single direction without any foam or bubble. Otherwise, flow meter can’t get right value of measurement. Volume fluctuation testing The test is aimed at defining the hose’s inner cubage variability of fuel dispenser under maximum pressure condition. According to fuel dispenser’s working principal, hose always

technical specification

    etailing how a PCD   fuel dispenser should handle the transaction states.   20 Bin16 R(1-3) M   TR_Buff_Contr_Id   (14H) W(1-3)   Indicates fuel dispenser which CD has locked the transaction. This can   be read in any FP state and written ONLY under fatal   error conditions (see 2.2.3).   0 0 = transaction is unlocked and available to any CD   X Y = locked   255 255 = stand alone   PCD Comment:   The PCD maintains the details of the SCCD device that   locks a transaction.   TRANSACTION COMMAND   Clear_Transaction   30 CMD W(2 3) M   (1EH) To clear a payable fuelling transaction in the transaction   buffer. A transaction does not have to have been locked   before it can be cleared. This command is allowed when   Transaction Buffer is in state 2 or 3.   Please note that an Unsolicited Trans_State (Data_Id   fuel dispenser 100) must be transmitted as a result of this command.   This action must occur even if the state has not changed   as a result of the command.   Clear all transactions should not be implemented.   PCD Comment:   The PCD must support this transaction command. See   the earlier chapter dealing with transaction states.  March 2006 IFSF - STANDARD FORECOURT PROTOCOL FP31_2.23   DISPENSER APPLICATION   Pag

we are committed to create the best workplace, encourage our staffs to put their own personalities into their jobs, and provide them a stage to show themselves.

    fuel dispenser Previous print editions Subscribe On the cover Asia s spending spree means Oct 14th 2006 fuel dispenser Subscribe to the print edition that the world is no longer as Oct 7th 2006 Or buy a Web subscription for vulnerable to an American Sep 30th 2006 full access online slowdown as it once was Sep 23rd 2006 RSS feeds Sep 16th 2006 leader fuel dispenser Receive this page by RSS feed More print editions and covers » The world this week Politics this week Full contents Business this week Enlarge current cover Past issues regional covers Business Subscribe Leaders