HONGYANG GROUP Honduras Technical Center

Fax: +86 (577)88097280

HONGYANG Group logo

HONGYANG GROUP Honduras Technical Center , Discuss Technical Problem , Suply After Service Online of Fuel Dispenser, Please Regist Firstly

C-GA FUEL DISPENSER

C-GA

C-GA FUEL DISPENSER

Pump Type: Optional

Inlet Pressure : >=54kPa.

Flow rate (L/min.): 55±5

Suction Distance (m) :6(verticalmente) / 50(orizzontalmente)

FlowMeter Type : Optional

Accuracy :±0.2%

Motor Voltage(V): 110V/220V/380V,50Hz/60Hz

Capacity(hp) :1HP(0.75kw)

Input Voltage : 110V/220V/380V,50Hz/60Hz

Nozzle: Auto Shut-off Nozzle

Environmental Condition :-40~~+55degree

Control Type : Solenold Vale Control Type

Preset: Function Provided(Small LCDIndicator)

Display(Counter):Type LCD and Bright Backlight

Digit of Volume: 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price : 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range: 0~~99,999,999,99

Optional Display: Type LCD and Bright Backlight

Digit of Volume: 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount: 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price :0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range: 0~~99,999,999,99

Totalizer:1~~9,999,999

Hose: 4.5m

Weight : 255kg

Dimension(L×W×H): 1100*525*2170(mm)

Dimension(L×W×H)Of Qty of Container: 40ft: 44 20ft: 22

products links

links

technical archives

    scharge, turn anticlockwise to increase discharge; reassemble hand wheel pin and lead-seal it after adjustment. Common failure and Tro fuel dispenser ubleshooting The main failure of four-piston measurement transducer includes outside leakage and accuracy decline. As appear outside leakage, all seal sections should be inspected. Generally, failure will be solved through removing damaged or aging sealed components. Diagram 2-22: working principle of four-piston measurement transducer Through long time of operation, the accuracy of measurement transducer is declined due to various abrasion occurred on cam, ideal wheel, distributing valve, valve seat, and piston. From start, regulating adjusting wheel makes the accuracy meet the requirements about national metrology appraisal. If still can’t reach the wanted accuracy, some abrasion examinations should be conducted, including components of piston, distributing valve and valve seat. These components surfaces are fragile to be scratched by hard grain, increasing inner leakage and accuracy decline. If appear above situation, replace piston or grind the surfaces of distributing valve and valve seat. Double soft piston measurement transducer The article will introduce the structure, working principle and maintenance. Structure This type of measurement transducer has two soft pistons, smaller than four-piston type. Appearance and partial cutaway view is illustrated in Diagram 2-23, structure and key components in Diagram 2-24. Diagram 2-23: Cutaway view and figure of four-piston measurement transducer It has two pistons formed a 120 degree angle, driven by connecting rod that force crankshaft moving. Component cylinder is installed in parallel. The two rolling bearings respectively instal fuel dispenser led on connecting rod and crankshaft reduces the friction. The end of connecting rod contacts with bushing. The oil discharge is controlled by distributing valve that communicating with inlet and outlet. On the top of distributing valve mounted a bearing used for installing cranks fuel dispenser

technical specification

    LICATION   Page: 4  0 Record of Changes   Date Version Modifications   Initial Releas fuel dispenser e following approval at IFSF Dispenser WG Meeting on 10th November 2004.  November 2.00  2004   The following changes have been made from Draft Version 2.02   - Draft removed and Version renumbered to 2.0  Version 2.00 IFSF - STANDARD FORECOURT PROTOCOL November 2004   CONTROLLER DEVICE APPLICATION   Page: 5  1 General  1.1 Definitions and Abbreviations   DEFINITION ABBREVIATIONS DESCRIPTION   Controller Device CD A CD is a device that is capable of controlling any other devices on the   forecourt network with which it is connected. The CD may be   configured by another controller device.   Controller Device CDP A CDP is a Controller Device accessed across a network that is not   Point directly connected to the Forecourt Lon. This configuration is common   in Master Slave architectures. The master is directly connected to the   Lon whilst the Slaves get their infor fuel dispenser mation and make control requests   via the master.  1.2 Communications   Independent to the current state of the CD it must always respond to all communicatio fuel dispenser

we are committed to create the best workplace, encourage our staffs to put their own personalities into their jobs, and provide them a stage to show themselves.

    Apr 27th 2006 | DENVER From The Economist print edition A new and controversial approach to classroom pay THE step is small fuel dispenser , but a revolutionary principle lies behind it. Since the beginning of the year, Denver s school district has been running a new salary system, ProComp, which is implicitly based on a simple notion that some teachers do their job better than others, and should be paid for it. America s teachers unions have long considered this idea heresy, but a majority of Denver s teachers backed it after several years of pilot projects convinced them that the right kinds of performance would be measured and rewarded. ProComp went into effect after the city s voters backed a referendum that will boost property taxes by $25m. All that money will go towards increasing teachers pay under the new system, but the rise will only go to those who meet certain performance goals. Teachers who were already working in the school district can choose whether to enroll in the new pay system; 30% have joined so far. New teachers will not have a choice, and will be paid based on performance all through their careers. The plan will work, says Brad Jupp—a former teacher and one of its architects—because it tries to measure several aspects of performance that, in combination, promote better learning. Instead of simply using test scores for an individual teacher s students, for example, Denver also looks at specific targets set for that teacher by the school principal. School-wide performance—measured objectively by the district—is also part of the mix, so that teachers will want to co-operate and principals will be encouraged to set high standards for them. Besides paying more for good teaching, the new system fuel dispenser rewards teachers who fill difficult or especially valuable positions. This includes not only working in tough schools, but also jobs, such as speech therapy or high-school maths, that have few qualified teachers and fast turnover. One reason such slots are hard to fill i fuel dispenser