HONGYANG GROUP Honduras Technical Center

Fax: +86 (577)88097280

HONGYANG Group logo

HONGYANG GROUP Honduras Technical Center , Discuss Technical Problem , Suply After Service Online of Fuel Dispenser, Please Regist Firstly




FlowMeter Type: Optional

Accuracy : ±0.2%

Pressure Loss (kg/cm): Under 0.25

Motor Voltage(V) :110V/220V/380V,50Hz/60Hz

Capacity(hp): 1HP(0.75kw)

Input Voltage: 110V/220V/380V,50Hz/60Hz

Nozzle: Auto Shut-off Nozzle

Environmental Condition: -40~~+55degree

Control Type: Solenold Vale Control Type

Preset: Function Provided(Small LCDIndicator)

Display(Counter) :Type LCD and Bright Backlight

Digit of Volume : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount :0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price: 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Optional Display: Type LCD and Bright Backlight

Digit of Volume : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price: 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Totalizer :1~~9,999,999

Hose 4.5m

Weight : 215kg.

Dimension(L×W×H) : 900*620*2180(mm)

Dimension(L×W×H)Of Qty of Container : 40ft: 45 20ft: 22

products links


technical archives

    is provided for maintenance. Check floater. Disconnect upper cover, check ball floater and returned oil floater and find whether oil flow into floater. Ball floater is made of two brass bowls through welting each other. If welding line exists defect it is easy that oil flow into. It is suggested to change a floater or weld the broken. Putting repaired floater into water more than 80 degree, if found no foam at welding line fuel dispenser the repaired one could continue to be used. Some manufacturers replace ball floater, returned oil buoy and exhausting valve seat with ball valve subassembly. Adopting Oil-resistant plastic substitute thin brass board to make returned oil floater. Suggesting change a new floater as found any abnormal transformation of fl fuel dispenser oater. Inspect returned oil valve. There are two situations exhausting pipe leakage caused by the returned oil valve. One situation is that returned oil valve is cemented due to extensive oil. In this case it is suggested to clean valve and fuel dispenser reassemble it. Another situation appears because the returned oil valve is stuck. Taking away burr or waste on leader and reassemble it reference to Diagram 2-13. 3.3 No delivery or inefficient discharge caused by vapor separator Examine filter. A blocked filter not only affects fuel the suction capacity, but also generates abnormal noise. It is suggested to clean and reassemble filter. Don’t use brush to clean metal net so as not to increase net hole and affect filter accuracy. Inspect check valve. If check valve is stuck fuel dispenser can’t discharge any oil. The method to solve the problem is to clean waste after disconnecting spring seat, spring and check valve, and reassemble it. Make sure that the movement of check valve is agile. Inspect the leakage between tank and fuel dispensers. The inspection is conducted with filter check. If no oil or oil level go down slowly in low pressures chamber, there must leakage in bottom valve or pipeline. If there is still leakage occurred after solve above problem, carefully examine

technical specification

    TPV does not reply   ? the console reiterates its request  We must therefore always refer to this case particularly with regard to remote parameterisation in which  the messages issued by the TPV are long: the initial request must therefore always be issued by the  ATM based on information from the TPV (new parameters to be loaded).  1   the first block comprises the Management byte and the length fuel dispenser of the application message; the last  block comprises the signature.  All rights reserved ? Printed on 281004 10:10 3898   Ref : NT1118R1   MPA V5.2 fuel dispenser : TECHNICAL SPECIFICATIONS   Nb Pages : 98 + 0 PJ   for the ATM-MONETICS LINK   fuel dispenser Date :  POS Department   10.1.4. Protocol parameterisation   This concerns:   the speed of communication (1200 to 9600 baud)   the maximum length of the Information field of frames   These parameters must be chosen according to the characteristics of units and the environment  (electromagnetic interference); frames with 1024 bytes enable the routing of messages linked to a  transaction without being broken down into blocks.   These parameters are fixed and are introduced by configuring the two systems; they are not  negotiable on-line.  All rights reserved ? Printed on 281004 10:10 3998   Ref : NT1118R1   MPA V5.2: TECHNICAL SPECIFICATIONS   Nb Pages

we are committed to create the best workplace, encourage our staffs to put their own personalities into their jobs, and provide them a stage to show themselves.

    acceptable ‘provision of information?and unacceptable ‘mind control??argue Ms Jolls and Mr Sunstein. This acute sensitivity to losses is not the only bias behaviouralists have discovered. People also have great difficulty understanding risks. The weight a person gives to a scenario—flood, fire, winning the lottery—should depend on its likelihood. In fact, it depends on how easily it can be envisaged. People will pay fuel dispenser more for air-travel insurance against “terrorist acts?than against death from “all possible causes? Canny governments can work with the grain of this psychology. The grisly campaigns against smoking aim to put the dangers firmly in people s minds; to turn a statistical risk into a visceral image. They have been effec fuel dispenser tive, perhaps too effective. There is some evidence that people now overestimate the risks of smoking. But such campaigns can also have nasty side effects, Mr Glaeser argues. The fear, shame and guilt they inculcate acts as a kind of “ps fuel dispenser ychic tax? reducing the demand for smoking. But unlike a genuine sin tax, which shifts money from taxpayers to the treasury, psychic taxes impose emotional costs without raising revenues. By portraying a habit as self-destructive and therefore shameful, such campaigns also pave the way for hard paternalism, Mr Glaeser says. The recent wave of smoking bans rather proves his point. The callow nephew There are many ways for a government to queer the pitch in favour of one social result (more saving, less smoking) or another. In fact, as Messrs Thaler and Sunstein argue, governments often cannot remain neutral even if they want to. Something must serve as the default option, something must come top of the menu, and information, if it is to be provided at all, must be framed in one way or another. The soft paternalists want the government to use these tools knowingly, in favour of the outcome its citizens themselves would prefer if only they had the necessary discipline and discernment. For it