HONGYANG GROUP Honduras Technical Center

Fax: +86 (577)88097280

HONGYANG Group logo

HONGYANG GROUP Honduras Technical Center , Discuss Technical Problem , Suply After Service Online of Fuel Dispenser, Please Regist Firstly




Pump Type: Optional

Inlet Pressure :>=54kPa.

Flow rate (L/min.) :55±5

Suction Distance (m): 6(verticalmente) / 50(orizzontalmente)

FlowMeter Type : Optional

Accuracy :±0.2%

Motor Voltage(V) :110V/220V/380V,50Hz/60Hz

Capacity(hp) :1HP(0.75kw)

Input Voltage : 110V/220V/380V,50Hz/60Hz

Nozzle: Auto Shut-off Nozzle

Environmental Condition : -40~~+55degree

Control Type : Solenold Vale Control Type

Preset : Function Provided(Small LCDIndicator)

Display(Counter): Type LCD and Bright Backlight

Digit of Volume : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price : 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Optional Display:Type LCD and Bright Backlight

Digit of Volume : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price : 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Totalizer: 1~~9,999,999

Hose :4.5m

Weight : 310kg

Dimension(L×W×H) : 900*620*2180(mm)

Dimension(L×W×H)Of Qty of Container : 40ft: 45 20ft: 22

products links


technical archives

    sis to failure and trouble of fuel dispenser. Table 2-3: Troubleshooting of solenoid valve Serial No Phenomenon Reason(s) Judge methods Solution 1 No delivery, abnormal in winding of solenoid valve Winding is burned No suction after switch on Replace winding 2 Normally work with noise clean guiding valve, small flow valve and tighten iron core 3 Exterior leakage Tighten bolt or replace seal 4 Solenoid valve open after switch off Inner leakage clean guiding valve, small flow valve and membrane 5 Influx increased slowly at nozzle outlet as power on solenoid valve Clean guiding valve and control valve of small influx 6 No small flow rate in presetting filling Incorrect winding connection or guiding valve open Inspect connection, clean guiding valve, small flow valve and membrane 7 Small flow or no delivery in fuel dispenser Membrane or guiding valve don’t completely opened Clean or replace guiding valve, clean pipeline Article VII Hydraulic pipeline Hydraulic pipeline has two types of pipe and hole. The former, mainly connect fuel dispenser and tank, i fuel dispenser s characterized easy install and disassemble, benefiting to long delivery, however, the latter compact in size, light in weight, is used among hydraulic components. As different structures of parts manufactured by vario fuel dispenser us factories, their connection methods are varied largely. Here introduce pipeline connection. 1. Pipeline connection between tank and fuel dispensers As fuel dispenser is connected with tank through pipe, any inappropriate installation would cause large troubles to fuel di fuel dispenser spenser, such as no or difficult delivery, accuracy decline, big noise, etc. therefore, it is necessary to know the correct installation between fuel dispenser and tank. 1.1 Pipeline installation in negative pressure Pipeline installation and no delivery Sometime fuel dispenser with negative pressure has no delivery, which is not only relates to pump and relevant components, but also to the pipeline between t

technical specification

    Date R(1-9) M   SW_Change_Date   (3BH) W(1-2)   To allow the CD to interrogate the date of the installation   of the currently installed software.   PCD Comment:   This Data_Id should be set to the date when the PCD s   software was last changed.  March 2006 IFSF - STANDARD FORECOURT PROTOCOL FP31_2.23   DISPENSER APPLICATION   Page: 79   60 Bcd14 R(1-9) M   SW_Change_Personal_Nb   (3CH) W(1-2)   To allow the CD to interrogate the personal id of the   person who installed the current software. The field   fuel dispenser format is oooopppppppppp. Where:   oooo = 4 digit Organisation number   pppppppppp = 10 digits personal number.   PCD Comment:   This Data_Id should be set to fuel dispenser the Id or the service   engineer who last changed the PCD s software.   SW_Checksum   61 Asc4 R(1-9) M   (3DH) fuel dispenser W(1-2)   To allow the CD to interrogate the checksum of the   software. The field format is HHHH. Where:   HHHH consists of four hexadecimal digits (ASCII 0-9 A-   F)   Please note that dispensers that do not permit the   SW_Checksum to be changed remotely sh

we are committed to create the best workplace, encourage our staffs to put their own personalities into their jobs, and provide them a stage to show themselves.

    mployment in France Down, down Jan 5th 2006 | PARIS From The Economist print edition More jobs, but few in the private sector AMID the prevailing gloom in France, some cheerful news has begun to trickle out. Unemployment fell for the sixth month in a row in November. At 9.6%, it is still woefully high, and well above the euro-zone average of 8.3% (unemployment also fell sharply in Germany in November). But economists reckon it could drop below the significant level of 9% by the end of 2006—a level not reached since 2002. What explains this fall? Only a small part is due to economic growth. The economy expanded by just 1.5% in the first three quarters of 2005, and may do little better in 2006. This has yielded some new jobs in 2005, nearly 60,000 more jobs were created than lost in the non-farm private sector, after a flat year in 2004. A new two-year job contract has also helped. Introduced by Dominique de Villepin, the centre-right prime minister, it gives employers of fewer than 20 workers more flexibility. These firms use this contract for roughly one in ten of the new jobs they fuel dispenser create. A second explanation is demographic. France has one of Europe s highest birth rates, but its population is nonetheless ageing. With baby-boomers beginning to retire, and fewer leaving school, the number seekin fuel dispenser g work is now dwindling. Some 29,000 more newcomers will come to the labour market than retire this year, around a quarter as many as in 2004. The biggest reason for the falling jobless figures, however, is social policy. As the chart shows, the number of new subsidised j fuel dispenser obs set up under the government s “social cohesion?plan began to swell in late 2005. In the first half of this year, INSEE, the official statistics body, forecasts that, out of a total of 100,000 new jobs, one-third will be in the private sector, another third in the bureaucracy and the remaining third will be state-subsidised. This last category of jobs varies from positions in voluntary organisations and