HONGYANG GROUP Honduras Technical Center

Fax: +86 (577)88097280

HONGYANG Group logo

HONGYANG GROUP Honduras Technical Center , Discuss Technical Problem , Suply After Service Online of Fuel Dispenser, Please Regist Firstly

K-GA FUEL DISPENSER

K-GA

K-GA FUEL DISPENSER

Pump Type :Optional

Inlet Pressure :>=54kPa.

Flow rate (L/min.): 55±5

Suction Distance (m) :6(verticalmente) / 50(orizzontalmente)

FlowMeter Type : Optional

Accuracy : ±0.2%

Motor Voltage(V): 110V/220V/380V,50Hz/60Hz

Capacity(hp) :1HP(0.75kw)

Input Voltage :110V/220V/380V,50Hz/60Hz

Nozzle :Auto Shut-off Nozzle

Environmental Condition :-40~~+55degree

Control Type :Solenold Vale Control Type

Preset : Function Provided(Small LCDIndicator)

Display(Counter) :Type LCD and Bright Backlight

Digit of Volume : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount :0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price: 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Optional Display :Type LCD and Bright Backlight

Digit of Volume :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price : 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Totalizer :1~~9,999,999

Hose :4.5m

Weight :280kg

Dimension(L×W×H) : 1180*650*2020(mm)

Dimension(L×W×H)Of Qty of Container : 40ft: 29

products links

links

technical archives

    acklist, etc. Once found something wrong, it will obtain latest data from Center controller. Anti-low temperature The minimum limitation of working temperature is ?0℃on general fuel dispenser. But on IC card fuel dispenser,?0?due to employ temperature control device. Turn on the device when necessary. Apart f fuel dispenser rom the above functions IC card fuel dispenser should be provided with these traits such as explosion-proof electric safety, anti-dust, anti-interference, high applicability of power supply, high reliability, low ratio of failure, convenient for combination and expansion. Article IV Fuel dispenser and reader working flow Refueling process Under normal situation, filling process should be like this: When power supply is connected, the whole system begins to initiate. As CPU get open command (nozzle has switched on) motor is startup; small flux solenoid valve switch on, oil flowing out of nozzle; CPU calculates volume filled according to pulse transmitted by sensor; at same time, large flux solenoid valve is open, fuel dispenser being large filling state. Metering circuit counts paid volume and money on basis of pulse sign transmitted by flow sensor, then transmit these data and unit price into CPU that control the display of current filing. Metering CPU, if in randomly filing, will switch off solenoid valve and motor to end filing when receive stop sign (nozzle has switched off). If in presetting filing process, metering CPU will firstly close large flux solenoid valve when paid volume approaching to presetting volume (100ml~~300ml), small flux solenoid valve being fuel dispenser open until paid volume is equivalent to presetting volume. Finally, current filing information such as filled volume, money and unit price (PPU) is transmitted into CPU and display on screen. The proportion of large flux to small flux is 10 to 1. The knowledge of fuel dispenser’s normal working procedure is of importance to judge trouble and failure. Reader flow chart of main programme Diagram 3-27: Filling operation flow

technical specification

    ayen xs:documentation   xs:annotation   xs:enumeration   xs:enumeration value=SZ   xs:annotation   xs:documentation Swaziland xs:documentation   fuel dispenser xs:annotation   xs:enumeration   xs:enumeration value=SE   xs:annotation   xs:documentation Sweden xs:documentation   xs:annotation   xs:enumeration   xs:enumeration value=CH   xs:annotation  August 2002 IFSF STANDARD FORECOURT PROTOCOL FP319_1.00   EPS POS INTERFACE SPECIFICATION   Page 132 of 146   xs:documentation Switzerland xs:documentation  fuel dispenser   xs:annotation   xs:enumeration   xs:enumeration value=SY   xs:annotation   xs:documentation Syrian Arab Republic xs:documentation   xs:annotation   xs:enumeration   xs:enumeration value=TW   xs:annotation   xs:documentation Taiwa fuel dispenser n Province Of China xs:documentation   xs:annotation   xs:enumeration   xs:enumeration value=TJ   xs:annotation   xs:documentation Tajikistan xs:documentation   xs:annotation ?

we are committed to create the best workplace, encourage our staffs to put their own personalities into their jobs, and provide them a stage to show themselves.

    About sponsorship Overview Sep 21st 2006 From The Economist print edition America s Federal Reserve held its benchmark interest rate at 5.25%, extending its pause for a second consecutive month after two years of tightening. The Fed said that the “moderation in economic g fuel dispenser rowth appears to be continuing?and that “inflation pressures seem likely to moderate over time? but added that “some inflation risks remain.? Inflationary pressure in America eased. The annual rate of consumer-price inflation was 3.8% in August, down from 4.1% in July. Month on month, consumer prices rose by 0.2% in August, having increased by 0.4% in July. Core prices, which exclude the volatile categories of energy and food, increased by 0.2% for the second consecutive month. The American housing market cooled further. Housing starts dropped by 6% in August compared with July and were 19.8% below their rate in August 2005. Confidence among homebuilders continued to fall. The National Association of Home Bui fuel dispenser lders Wells Fargo Housing Market Index fell for the eighth consecutive month in September, to its lowest level since 1991. America s current-account deficit, the broadest measure of trade in goods, services and investment flows, widened to $218.4 billion, or 6.6% of GDP, in the second quarter. Industrial production in the euro area fell by 0.4% in July compared with the previous month, thanks to weak production in France and Italy. Year-on-year growth in industrial output slowed to 3.2% in July, from 4.4% in June and 5.2% in May. Spiri fuel dispenser ts were low in Germany. The ZEW economic-sentiment indicator, based on a survey of analysts and institutional investors, fell by 16.6 points in September to -22.2, far below its historical average of 35. The decline is attributed to fears of weakening global demand, slowing private consumption and higher costs. The annual rate of growth of Britain s broad money supply, M4, rose to 13.7% in the year to August, its fastest