HONGYANG GROUP Honduras Technical Center

Fax: +86 (577)88097280

HONGYANG Group logo

HONGYANG GROUP Honduras Technical Center , Discuss Technical Problem , Suply After Service Online of Fuel Dispenser, Please Regist Firstly

P-G FUEL DISPENSER

P-G

P-G FUEL DISPENSER

Pump Type :Optional

Inlet Pressure:>=54kPa.

Flow rate (L/min.) :55±5

Suction Distance (m): 6(verticalmente) / 50(orizzontalmente)

FlowMeter Type : Optional

Accuracy :±0.2%

Motor Voltage(V) :110V/220V/380V,50Hz/60Hz

Capacity(hp) :1HP(0.75kw)

Input Voltage : 110V/220V/380V,50Hz/60Hz

Nozzle : Auto Shut-off Nozzle

Environmental Condition : -40~~+55degree

Control Type :Solenold Vale Control Type

Preset : Function Provided(Small LCDIndicator)

Display(Counter) :Type LCD and Bright Backlight

Digit of Volume : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount :0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price : 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Optional Display Type :LCD and Bright Backlight

Digit of Volume : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price : 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Totalizer: 1~~9,999,999

Hose: 4.5m

Weight : 205kg

Dimension(L×W×H) : 1060*550*1620(mm)

Dimension(L×W×H)Of Qty of Container : 40ft: 44 20ft: 22

products links

links

technical archives

    re approval working successfully being conducted. Environmental temperature as approval should keep in the range of ?0?to ?0? in approval process temperature not exceed 3? relative temperature between 30?and 90? power supply within ?0% to ?5%; and frequency ±1Hz. The mediums used in approval should adapt real media excepting in factory approval. As different medium would be adaptable to fuel dispenser, every medium should be appraised. Some of them are prohibited, especially water. The highest temperature of medium in approval should not exceed 30? the lowest temperature without coagulation. The temperature difference between the one at the outlet of fuel dis fuel dispenser penser and the temperature measured in standard instrument should not exceed 4? Otherwise, the approval is invalid. Standard instrument used in approval whose measuring accuracy no lower than one fifth of the allowed tolerance of fuel dispenser, should pass over appraisal of the Measurement Department and be valid within period. There are many standard instruments being adaptable to fuel dispenser’s approval, however, the most popular one is standard metal instrument of measurement. Standard metal instrument of measurement adapted in approval should, in accordance with the requirement of fuel dispenser’s regulations and procedure, be Class II standard metal instrument of measurement with cubage no less than o fuel dispenser ne minute’s discharge volume of fuel dispenser, approval period being 3 years. Standard metal instrument of measurement often is made of stainless steel or carbonized steel with protecting painting, no air vent, erosion-resistant and smooth surface. Its structure is shown in Diagram 8-1. 1: Overflow cover 2: Metering neck 3: Body 4: Bracket 5: Adjusting bolt 6: Drain fuel dispenser valve 7: Leveling instrument 8: Scale Diagram 6-1: Sketch map of metal standard instrument of measurement Standard instrument of measurement is composed of overflow cover, body, measuring neck, scale, valve, which should meet the follo

technical specification

    Page   Message Flows 23178   3.2 Indoor Payment Terminals Message Flow   3.2.1 Normal Indoor Sale Message Flow   The following shows the message flow for a normal indoor sale transaction.   POS FEP   1200 Financial Request Transaction routed  Customer tenders   to appropriate  card as payment for   authorizer  a trans fuel dispenser action of  known amount   Request is approved  If Response 1210 Financial Request Response   or declined;  indicates Approved  continue otherwise   If approved;  ask customer for an   customer is billed by  alternative means of   the issuer for the  payment.   fuel dispenser transaction.   Figure 3 Normal Indoor Sale Message Flow   Wednesday 10 May 2006 - Revision 03   Document title   IFSF POS to FEP Interface   Section Page   Message Flows fuel dispenser 24178   3.2.2 Customer Aborts Indoor Sale   The following shows the message flow for an indoor sale transaction aborted by the customer   where the response to the 1200 Financial Request

we are committed to create the best workplace, encourage our staffs to put their own personalities into their jobs, and provide them a stage to show themselves.

    New ideas Ukraine s government Pipe down Charlemagne Third time lucky? Britain Anti-social behaviour Soothing the savage breast George Galloway Big Blatherer Politics Under new management Tube str fuel dispenser ikes Militant tendency Failing schools Off with their heads Retailing therapy Back to the malls Bad for people, bad for profits Out of the frying pan Bagehot Wanted a new leader and a new direction Articles flagged with this icon are printed only in the British edition of The Economi fuel dispenser st Advertisement Classifieds Sponsors feature About sponsorship » Jobs Business Jobs Jobs fuel dispenser Jobs Jobs Consumer Non Executive Executive Director Chief, Evaluations Training Co-ordinator Manager - Director for DFID s