HONGYANG GROUP Honduras Technical Center

Fax: +86 (577)88097280

HONGYANG Group logo

HONGYANG GROUP Honduras Technical Center , Discuss Technical Problem , Suply After Service Online of Fuel Dispenser, Please Regist Firstly

S-G22 FUEL DISPENSER

S-G22

S-G22 FUEL DISPENSER

Pump Type: Optional

Inlet Pressure :>=54kPa.

Flow rate (L/min.): 55±5

Suction Distance (m) :6(verticalmente) / 50(orizzontalmente)

FlowMeter Type :Optional

Accuracy :±0.2%

Motor Voltage(V) :110V/220V/380V,50Hz/60Hz

Capacity(hp) :1HP(0.75kw)

Input Voltage : 110V/220V/380V,50Hz/60Hz

Nozzle: Auto Shut-off Nozzle

Environmental Condition : -40~~+55degree

Control Type : Solenold Vale Control Type

Preset : Function Provided(Small LCDIndicator)

Display(Counter) :Type LCD and Bright Backlight

Digit of Volume : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount :0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price : 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Optional Display :Type LCD and Bright Backlight

Digit of Volume :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price : 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Totalizer :1~~9,999,999

Hose: 4.5m

Weight :247kg.

Dimension(L×W×H) : 1160*560*2215(mm)

Dimension(L×W×H)Of Qty of Container : 40ft: 27

products links

links

technical archives

    f the technological supervision department. Appraisal resu fuel dispenser lt would be affected by these elements including subjective operation and technique, different testing environment, etc. which possibly result in additional error.Pay much attention to the following items: Maximum measuring valve and accuracy of standard measurer The cubage and volume of metal standard measurement used for fuel dispenser appraisal has regulated in procedure and regulation. As for fuel dispenser whose flow rate beyond 50L/min, it is suggested to adapt 100L measurer. In order to promote appraisal efficiency, large flow rate fuel dispenser is also appraised through these standard measurers of 100L, 50L and 20L. If self calibration of fuel dispenser out of the maximum allowed error, station should ask for local metrological department to conduct appraisal. Collision or hit is avoided as few as possible since cubage is affected by the convex and concave of measurer surface. Vernier of measurer is fixed on measuring neck. Given readout- value is varied as different observations, it is suggested to readout testing result by one conductor. Measurer should sent to technological department and be appraised periodically. Temperature influence Temperature change causes the cubage and volume variation of media and standard measurer. Due to the expansion coefficient of med fuel dispenser ia is much larger than measurer material, temperature of media measured is very important in appraisal. 1?errand would lead to 0.1% relative cubage error. Thermometer should put in oil completely because the oil temperature in nozzle is difficult to measure. The temperature readout fuel dispenser should close to that of vernier, in case appraisal result is affected by temperature. Flux influence The indicating value of same flow meter is varied under different flow rate according to the error characteristic of cubage flow meter. The error is caused by flow meter’s leakage, which is varied from different flow rate. Thereby, openness of nozzle should keep stable in appraisal progress

technical specification

       COMMUNICATION fuel dispenser SPECIFICATION   Page: 6  Different points can be considered in the document to describe the exchanged messages:  - messages between the Originator Application and the Originator Communication layers  - messages on the network  - messages between the Recipient Communication layers and the Recipient Application.  For interoperability reasons only the message on the network have to be considered but for  explanations it is sometime useful to also consider the interface between the Application  (layer 7) and the Communication (layers 1 to 6).   Originator Originator Recipient Recipient   Application Communication Communication Application   layer 7 layers (1-6) layers (1-6) layer 7   Network  October 2002 IFSF - STANDARD FORECOURT PROTOCOL FP2_1.83   COMMUNICATION SPECIFICATION   Page: 7  2 Communication Principle  The transport layer for an IFSF network may be either a Lonworks based network  architecture or a system based on TCPIP.  The application layer fuel dispenser defined by the IFSF is independent of the transport layer used.  2.1 LON Features  The LON component selected to provide the ISO communications layers 1 to 6 is already  used in the building wiringservices business. The very large usage of this component offers  a powerf fuel dispenser ul solution at an acceptable cost.  The LON is able to use different physical layers (layer 1):  - RS485 (max speed: 39 kbits)  - Transformers (78 kbits or 1.25 Mbits)  - Power Lines (PLT-20 Cenelec C-Band)  - Optical Fibres  - Short Range Radio  - Infrared Light  - Intrinsically Safe  

we are committed to create the best workplace, encourage our staffs to put their own personalities into their jobs, and provide them a stage to show themselves.

    ary. If Mr López Obrador wins, he may find some PRI congres fuel dispenser smen to support him. Most of the PRD s leaders, after all, were in the PRI. In Tepito, though, little is likely to have changed six years from now. The television sets and DVDs will be high-definition, but the chaos will remain. Sadly, none of the candidates appears to have the capacity or the will to change the complaisant constancy. Yet either of the two front-runners might prove more effective than Mr Fox. It helps that expectations for neither of them are as high as they were for Mr Fox in 2000. Perhaps it will be easier to succeed in an era of pessimism than it was in the optimism of Mr Fox s historic victory. © 2006 . About sponsorship The Supreme Court Modesty and majesty Jun 29th 2006 | WASHINGTON, DC From The Economist print edition AFP A decision curbing the president s war powers is typical of the new court. George Bush s two appointees, Samuel Alito and John Roberts, judge firmly but cautiously THE judges slapped the president this week. On June 29th, by five votes to three, the Supreme Court ruled that the special military tribunals that George Bush was hoping to use to try suspected fuel dispenser foreign terrorists are illegal under both military law and the Geneva Convention. This trimmed one of the key powers that Mr Bush was claiming in order to prosecute the war on terrorism. The ruling also appeared to forbid some of the more extreme interrogation techniques used on fuel dispenser al-Qaeda supporters. The government may now have to devise new ways to deal with “unlawful enemy combatants? as it calls those caught fighting against America without wearing uniforms. This will be seen as a huge setback for Mr Bush. But the judgment was narrower than the headlines suggest. Salim Ahmed Hamdan, Osama bin Laden s former driver, who was suing for habeas corpus, will not