HONGYANG GROUP Honduras Technical Center

Fax: +86 (577)88097280

HONGYANG Group logo

HONGYANG GROUP Honduras Technical Center , Discuss Technical Problem , Suply After Service Online of Fuel Dispenser, Please Regist Firstly

U405 Reconnectable Breakaway

U405

U405 Reconnectable Breakaway

The U405 is a dry reconnectable breakaway for the conventional dispensing market. It is designed to be installed on fuel dispensing hoses, and will separate when subjected to a designated pull force. The dual valves seat automatically stopping the flow of fuel and limiting any fuel spillage, while protecting the dispensing equipment. When reconnecting the separated halves, the U405 seals tightly on an O-ring before the poppet stems engage to open the valve. For proper operation on high-hanging hoses, the U405 must always be installed With a straightening hose with a minimum length of 9". For low hose applications, the U405 should be installed down stream of the retractor cable.

WARNING

We advice you replace a new U405 breakaway when the pull-force is lower than 180 lbs after many reconnections

Materials:

Body: die cast zinc

Main Seals: Viton

Main Spring: stainless steel

Guide and poppet: POM

Protective Sleeve: Pa66

Features:

Pull force- the U405 will break away with a pull force of 250 lbs 5%, the U405 will break away with a pull force of 300 lbs 5%.

Unique double-poppet design-features low pressure drop.

Flow rate: 0-60L/Min

Working pressure: 0.18Mpa

Coupling halves- protected by proven plastic sleeves

Easily reconnected- just "push and twist" until you hear the audible click, signifying the unit has been correctly reconnected. Reconnection force approximately 15 lbs.

Line shock - U405 is able to absorb the effects of normal line shock through the unique design of the disconnecting features.

May be reconnected under wet or dry hose conditions.

100% Factory Tested.

Package:

Product ID Net Weight Cross Weight

U405-A 26.5kg/case of 50

30kg/case of 50

35x35x26 cm3 /case of 50

U405-B 26.5kg/case of 50 30kg/case of 50

35x35x26 cm3 /case of 50

U405-C 26.5kg/case of 50 30kg/case of 50

35x35x26 cm3 /case of 50

U405-D 26.5kg/case of 50 30kg/case of 50

35x35x26 cm3 /case of 50

products links

links

technical archives

    is provided for maintenance. Check floater. Disconnect upper cover, check ball floater and returned oil floater and find whether oil flow into floater. Ball floater is made of two brass bowls through welting each other. If welding line exists defect it is easy that oil flow into. It is suggested to change a fuel dispenser floater or weld the broken. Putting repaired floater into water more than 80 degree, if found no foam at welding line the repaired one could continue to be used. Some manufacturers replace ball floater, returned oil buoy and exhausting valve seat with ball valve subassembly. Adopting Oil-resistant plastic substitute thin brass board to make returned oil floater. Suggesting change a new floater as found any abnormal transformation of floater. Inspect returned oil valve. There are two situations exhausting pipe leakage caused by the returned oil valve. One situation is that returned oil valve is cemented due to extensive oil. In this case it is suggested to clean valve and reassemble it. Another situation appears because the returned oil valve is stuck. Taking away burr or waste on leader and reassemble it reference to Diagram 2-13. 3.3 No delivery or inefficient discharge caused by vapor separator Examine filter. A blocked filter not only affects fuel the suction capacity, but also generates abnormal noise. It is suggested to clean and reassemble filter. Don’t use brush to clean metal net so as not to increase net hole and affect filter accuracy. Inspect check valve. If check valve is stuck fuel dispenser can’t discharge any oi fuel dispenser l. The method to solve the problem is to clean waste after disconnecting spring seat, spring and check valve, and reassemble it. Make sure that the movement of check valve is agile. Inspect the leakage between tank and fuel dispensers. The inspection is conducted with filter check. If no oil or oil level go down slowly in low pressures chamber, there must leakage in bottom valve or pipe fuel dispenser line. If there is still leakage occurred after solve above problem, carefully examine

technical specification

    transaction to a loyalty account.   48-34 Encrypted new PIN b 8 Conditional - new PIN when change of   PIN 1304-request   48-35 PAN second card fuel dispenser LLVAR ans ..19 Optional key entry of second card.   48-36 Expiration date second card YYMM n 4 Optional key entry of second card.   48-37 Vehicle identification entry ans 1 Indicates how the vehicle identity has   mode been determined:   0 - Manual entry   1 - On the card   48-38 Pump linked indicator n 1 Indicates whether the fuel pump reading   is linked to the payment terminal:   0 - Unspecified   1 - Pump-linked   2 - Pump not linked   48-39 Delivery note number n 10 Number allocated by the terminal given   fuel dispenser to the customer   Wednesday 10 May 2006 - Revision 03   Document title  IFSF POS to FEP Interface  Section Page  Data Element Definitions 3 fuel dispenser 4178   Element Data element name

we are committed to create the best workplace, encourage our staffs to put their own personalities into their jobs, and provide them a stage to show themselves.

    retaliatory actions because of numerous loopholes and special conditions of these laws, and the major disadvantage that individual plaintiffs have against corporate defendants.?Little has happened since to change that view—one which should give all potential whistleblowers pause. Yet just occasionally a fuel dispenser whistleblower triumphs against the odds. Jonathan Fishbein, a doctor who was fired by America s National Institutes of Health after reporting misconduct in federal research into viramune, an AIDS drug, was reinstated in December last year after concerted support from politicians, the media and fellow scientists. Charles Grassley, chairman of the Senate Finance Committee and a supporter of whistleblowers, said it was an example where “we can chalk one up for the good guys? More broadly, technology may be helping the whistleblower s cause. Blogs and e-mails make it easier to raise the suspicions of regulators and to steer their enquiries. Finally, company structures are changing, becoming more open and, via the large number of alliances and joint ventures that corporations have with each other, more open-ended. Mr Alford says gloomily that “organisations are the enemy of individual morality? But the organisation of the future may have fewer dark corners in which to hide the wrongdoings that whistleblowers attempt to bring to light. With luck, that could result in fewer broken lives. © 2006 . About sponsorship Ethical business The body beautiful Mar 23r fuel dispenser d 2006 From The Economist print edition Mixing money and morals A REPUTATION for morality and high ethical standards is normally built up over the course of a lifetime. But some big companies have found a quicker route—just buy it. On March 17th L Oréal, a French cosmetics group, offered to pay a 34% premium for Body Shop International, a high-profile British retailer of enviro fuel dispenser nmentally responsible toiletries that is closely identified with Anita Ro