HONGYANG GROUP Honduras Technical Center

Fax: +86 (577)88097280

HONGYANG Group logo

HONGYANG GROUP Honduras Technical Center , Discuss Technical Problem , Suply After Service Online of Fuel Dispenser, Please Regist Firstly

U604 Hose Coupling

U604

U604 Hose Coupling

Materials:

Body: Body: Brass

Surface: electronic Chromium plated

Bushing: Brass

Features :

Designed for use between the hose and the pipe, or between the hose and other equipments.

100% Factory Tested.

Package:

Product ID Net Weight Cross Weight Dimension

U604-A/B 19kg/case of 100 22kg/case of 100 24x24x33 cm /case of 100

U604-C/D 28kg/case of 100 31kg/case of 100 30x30x36 cm /case of 100

products links

links

technical archives

    is provided for maintenance. Check floater. Disconnect upper cover, check ball floater and returned oil floater and find whether oil flow into floater. Ball floater is made of two brass bowls through welting each other. If welding line exists defect it is easy th fuel dispenser at oil flow into. It is suggested to change a floater or weld the broken. Putting repaired floater into water more than 80 degree, if found no foam at welding line the repaired one could continue to be used. Some manufacturers replace ball floater, returned oil buoy and exhausting valve seat with ball valve subassembly. Adopting Oil-resistant plastic substitute thin brass board to make returned oil floater. Suggesting change a new floater as found any abnormal transformation of floater. Inspect returned oil valve. There are two situations exhausting pipe leakage caused by the returned oil valve. One situation is that returned oil valve is cemented due t fuel dispenser o extensive oil. In this case it is suggested to clean valve and reassemble it. Another situation appears because the returned oil valve is stuck. Taking away burr or waste on leader and reassemble it reference to Diagram 2-13. 3.3 No delivery or inefficient discharge caused by vapor separator Examine filter. A blocked filter not only affects fuel the suction capacity, but also generates abnormal noise. It is suggested to clean and reassemble filter. Don’t use brush to clean metal net so as not to increase net hole and affect filter accuracy. Inspect check valve. If check valve is stuck fuel dispenser can’t discharge any oil. The method to solve the problem is to clean waste after disconnecting spring seat, sp fuel dispenser ring and check valve, and reassemble it. Make sure that the movement of check valve is agile. Inspect the leakage between tank and fuel dispensers. The inspection is conducted with filter check. If no oil or oil level go down slowly in low pressures chamber, there must leakage in bottom valve or pipeline. If there is still leakage occurred after solve above problem, carefully examine

technical specification

    Indicates the product description of the dispensed fuelling   product.   PCD Comment:   As this is an optional data field the PCD can NAK any   write requests to this Data_Id with a Data_ACK code of   fuel dispenser 2 (Data not writable) or reply to any read request with an   answer message with the respective Data_Id s length set   to 0.  March 2006 IFSF - STANDARD FORECOURT PROTOCOL FP31_2.23   DISPENSER APPLICATION   Page: 121   FUELLING TRANSACTION DATABASE   DB_Ad = FP_ID (21H-24H) + TR_DAT (21H) + TR_Seq_Nb (0001-9999)   Data Data Element Name fuel dispenser Field Type ReadWrite MO   Description   _Id (Value) in State   TR_Error_Code   12 Bin8 R(1-3) M   (0CH) (0-255)   Indicates the error code which may stopped the fuelling   transaction.   If the error codes = 0 then no error has occurred. (See the   FP_Err_Type in the Error Code Database).   At the end of the fuelling transaction the   Current_TR_Error_Code (D fuel dispenser ata_Id 39 in FP Database) is   stored here.   PCD Comment:   The PCD will have to set this Data_Id to the IFSF   dispenser error code value if an error occurred during   the transaction.   TR_Average_Temp   13

we are committed to create the best workplace, encourage our staffs to put their own personalities into their jobs, and provide them a stage to show themselves.

    g at St Grace Cathedral and similar places offers only the outward trappings of a Christian wedding. Most establishments get couples and their guests through the service in 40 minutes; one cut-rate place does it in 20. Catering is where the money is made, while m fuel dispenser ost other wedding services—flowers, choir, even harpist—are subcontracted. The most sought-after is the Western “priest? These are supplied by an ecclesiastical talent agency complete with fake ordination papers, should anyone bother to ask. For impoverished actors, models and English-language teachers, the work is manna the pay is ¥10,000-15,000 a service, and you can do eight a day. One young Westerner, who earns ¥10m a year for a three-day week, says the work is not easy unlike acting, where at least you get a break, you have to be a priest all day, and speak flawless Japanese to boot. Many of his fellow priests, he says, are cynical about t fuel dispenser heir work. But he often gets caught up in the occasion. Besides, the couple and congregation are not Christians; the wedding is their Western fantasy. And there are nowhere near enough genuine Western priests in Japan to cope with the demand. © 2006 . About sponsorship Central Asia The Shanghai Six at five Jun 8th 2006 | BEIJING From The Economist print edition A club, yes, but not a gentlemen s club AS THE fifth birthday on June 15th of the Shanghai Co-operation Organisation draws near, the club s six members? China, Russia, Kazakhstan, Kyrgyzstan, Uzbekistan and Tajikistan—have much to celebrate. Oil recently began to flow thr fuel dispenser ough a long-awaited pipeline to China from Kazakhstan (which also brings oil from Russia to China). A new round of joint military exercises is scheduled for next year. And, after successfully supporting Uzbekistan s President Islam Karimov in the wake of the Andijan massacre last year, China and Russia have slowed America s attempts to clamp international sanctions on a nu